Module renamed

README.md

@@ -1,4 +1,4 @@
-# SimpleLed
+# SimpLedRGB
 
 This Arduino IDE library is a simple way to control an RGB LED. It can also be used for other micro controllers that can be programmed via Arduino IDE.
 
@@ -8,20 +8,20 @@ Put this folder into your `~/Arduino/libraries` folder.
 
 ## Usage
 
-Include the header file `SimpleLed.h` and initialize the module with three PWM pins of your micro controller (in the case of the Arduino Uno 3, 5 and 6 for instance). Don't forget to call `begin()` in the setup() method. Now you can use both methods `setColor()` and `translateToColor()` to control your LED.
+Include the header file `SimpLedRGB.h` and initialize the module with three PWM pins of your micro controller (in the case of the Arduino Uno 3, 5 and 6 for instance). Don't forget to call `begin()` in the setup() method. Now you can use both methods `setColor()` and `translateToColor()` to control your LED.
 
 The RGB Colors are specified with the `Color` type. Red, green and blue can have values between 0.0 (off) and 1.0 (completely on).
 
 The following example defines three colors RED, GREEN and VIOLET and uses the two methods to control the led:
 
 ```cpp
-#include <SimpleLed.h>
+#include <SimpLedRGB.h>
 
 const Color RED = {1.0, 0.0, 0.0};
 const Color GREEN = {0.0, 1.0, 0.0};
 const Color VIOLET = {1.0, 0.0, 1.0};
 
-SimpleLed led(3, 5, 6);
+SimpLedRGB led(3, 5, 6);
 
 void setup {
 	led.begin();

SimpLedRGB.cpp

@@ -1,12 +1,12 @@
-#include "SimpleLed.h"
+#include "SimpLedRGB.h"
 
-SimpleLed::SimpleLed(int pinRed, int pinGreen, int pinBlue) {
+SimpLedRGB::SimpLedRGB(int pinRed, int pinGreen, int pinBlue) {
   this->pin_red = pinRed;
   this->pin_green = pinGreen;
   this->pin_blue = pinBlue;
 }
 
-void SimpleLed::begin()
+void SimpLedRGB::begin()
 {
   pinMode(this->pin_red, OUTPUT);
   pinMode(this->pin_green, OUTPUT);
@@ -15,7 +15,7 @@ void SimpleLed::begin()
   this->setColor(color);
 }
 
-void SimpleLed::setColor(const Color &color)
+void SimpLedRGB::setColor(const Color &color)
 {
   this->color.red = color.red;
   this->color.green = color.green;
@@ -26,7 +26,7 @@ void SimpleLed::setColor(const Color &color)
   analogWrite(this->pin_blue, 255 * color.blue);
 }
 
-void SimpleLed::translateToColor(const Color &color, int duration_millis)
+void SimpLedRGB::translateToColor(const Color &color, int duration_millis)
 {
   const Color colorStart = {
     this->color.red,

SimpLedRGB.h

@@ -1,5 +1,5 @@
-#ifndef SimpleLed_h
+#ifndef SimpLedRGB_h
-#define SimpleLed_h
+#define SimpLedRGB_h
 
 #include "Arduino.h"
 
@@ -9,7 +9,7 @@ typedef struct {
   float blue;
 } Color;
 
-class SimpleLed
+class SimpLedRGB
 {
   int pin_red = 0;
   int pin_green = 0;
@@ -18,7 +18,7 @@ class SimpleLed
   Color color = {0.0, 0.0, 0.0};
 
   public:
-  SimpleLed(int pinRed, int pinGreen, int pinBlue);
+  SimpLedRGB(int pinRed, int pinGreen, int pinBlue);
 
   void begin();
 

library.properties

@@ -1,9 +1,9 @@
-name=SimpleLed
+name=SimpLedRGB
 version=1.0.0
 author=Mal
 maintainer=Mal
 sentence=A simple Arduino library for RGB LED control
 paragraph=A simple Arduino library for RGB LED control. Just specify the three pins for red, green and blue and set colors or fade from one color to another.
 category=Signal Input/Output
-url=https://git.leinelab.org/Mal/SimpleLed
+url=https://git.leinelab.org/Mal/SimpLedRGB
 architectures=*